mohala oa tlhahiso ea lisele tsa sefahleho o leketlileng
| Mochini o phuthoang oa lithane tsa sefahleho o fanyehiloeng parameter ea tekheniki | |
| NO. | parameter ea motheo |
| 1 | kemiso ea ho phutholoha |
| 1.1 | unwind stand palo:2 |
| 1.2 | maxi. bophara ba pampiri e tala: ≤1650mm |
| 1.3 | shaft ea pampiri e tala: sebelisa 3-inch shaft + 6-inch shaft sleeve |
| 1.4 | phetoho ea pampiri e tala: manual |
| 1.5 | pampiri e etellang pele: manual |
| 1.6 | paper passby: Top passby |
| 1.7 | Mokhoa oa ho khanna: ho khanna lebanta la motor + (Nakong ea ho qala le ho emisa ho tloaelehileng, pampiri e tala ha e thelle mme pampiri ha e senyehe) |
| 1.8 | mokhoa oa ho kenya pampiri e tala: ho kenya ka cylinder |
| 1.9 | ho hokahanya ha pampiri: Motlakase le oa matsoho, mokhoa oa ho hokahanya o sebelisoang habeli |
| 1.10 | taolo ea tsitsipano ea pampiri: sistimi e ikemetseng ea ho laola tsitsipano ea pampiri |
| 2 | yuniti ya ho mena |
| 2.1 | lebelo la moralo: 120meters / min |
| 2.2 | lebelo la ho sebetsa: 100 metres / min |
| 2.3 | pontsho ya lebelo: m/min |
| 2.4 | tlhophiso ea leqephe: 3 plys: 50-600 maqephe kapa 150-1800 plys |
| 2.5 | mamello ea pampiri: ± 1 maqephe |
| 2.6 | mamello ea ho loants'a pampiri: ≤2mm |
| 2.7 | mamello ea pampiri: ≤± 2mm |
| 2.8 | ho hasana ha pampiri: E na le rolara e tala ea pampiri (rolara e kobehile ka rabara, bophahamo bo bohareng boa fetoha) |
| 2.9 | Sistimi ea karohano ea pampiri: karohano ea pampiri e ikemetseng |
| 3 | Yuniti ea Embossing-ho ikhethela |
| 3.1 | mohlala: tšepe ho boea, tšepe ho rabara, tšepe ho ea ho tšepe |
| 3.2 | ho khanna: koloi e ikemetseng (taolo ea inverter), enjene ho isa ho tšepe ka phetiso ea lebanta la synchronous, rolara ea tšepe ho rolara ea tšepe ka phetisetso ea gear |
| 3.3 | Tlhokahalo ea Gear: Lisebelisuoa tse peli tsa helical (thata HRC55) |
| 3.4 | Ho thatafala ha tšepe roll: Surface HRC60, chromium plated |
| 3.5 | Phetoho ea tšepe ea tšepe: Moqolo o le mong o ka aroloa ka boikemelo, ho bonolo ho o nkela sebaka |
| 3.6 | Mokhoa oa khatello ea tšepe ea tšepe: silinda |
| 4 | tsamaiso ea ho ntša |
| 4.1 | lebelo la moralo: 5logs / min |
| 4.2 | lebelo la ho sebetsa: 3 logs / min |
| 4.3 | ho ntša: lebanta le bataletseng |
| 4.4 | mokhoa oa ho laola: enjene ea maqhubu a feto-fetohang |
| 4.5 | thepa ea lebanta: PVC / PU |
| 5 | mokhoa oa ho liha othomathike |
| 5.1 | lebelo la moralo: 5 logs / min |
| 5.2 | lebelo la ho sebetsa: 3 logs / min |
| 5.3 | taolo ea ho phethola: silinda |
| 5.4 | phetiso: lebanta le bataletseng |
Ngola molaetsa wa hao mona mme o re romele wona
Lihlopha tsa lihlahisoa
-
Mochini oa ho Paka thaole ea Mofuta oa OK-905
-
OK-10 Type Handle Maker Machine
-
OK-102B Suction Type Case Packer
-
Mofuta oa OK-908D Mofuta oa Letlapa la Sefahleho se Seholo se Seholo sa Bag...
-
setaele sa ikonomi se tletseng sekoele sa dithishu tsa sefahleho...
-
Mofuta oa OK-902D Mofuta oa Sefahleho sa Lithaelese Tse Bundling Packing Mac...